Engine Oil System; Check The Engine Oil Level - IHI IC75-2 Operation Manual

ENGINE OIL SYSTEM

Check the Engine Oil Level

1. Open the engine cover, pull out the dipstick (1), and
remove oil with waste cloth.
2. Insert the dipstick fully into the oil level pipe and pull it
out.
3. The oil level is proper if oil on the oil level gauge
reaches between the H and L positions.
4. Refill engine oil through the filler port (2) if the oil level
is below the L level. Wait for approximately 15 minutes
after refilling, and check the oil level.
5. If the oil level is proper, close the lubrication port firmly
and close the engine cover.
6. Too much engine oil may cause engine troubles. Be
careful.
Using improper engine oil promotes sticking
of the piston ring, seizure of the piston and
cylinder, and wear of sliding parts.
Furthermore, it may cause increase of oil
consumption, reduction of the engine output,
and damage to the engine.
Troubles and accidents caused by using
improper engine oil are exempted from the
warranty.
IC75-2 ENG
MAINTENANCE
4-17
Engine cover