GREASING
Refill the grease nipples with grease using a grease gun.
Remove oozed old grease after refilling.
Vessel
Be sure to set the safety bars under the vessel
when lubricating with the vessel raised.
• Hinge pins of the vessel rear gate (1)
• Lock pins of the vessel rear gate (2)
• Control springs of the vessel rear gate (3) 2 positions
• Vessel joint pins (4)
• Dump cylinder rod pins (5)
• Dump cylinder foot pins (6)
Oscillating Link
• Oscillating link pins (7)
Grease the link pins everyday before starting works
if the machine is used on damp grounds or in mud.
IC75-2 ENG
MAINTENANCE
NOTICE
2 positions
2 positions
2 positions
2 positions
2 positions
8 positions
4-7