Engine Starting; After Starting The Engine - IHI IC75-2 Operation Manual

ENGINE STARTING

• Make sure that there are no persons or
obstacles around the machine and sound the
horn before starting the engine.
Be sure to sit on the seat when starting the
•
engine.
Do not turn on the starter motor for 30 seconds or
more. If the engine does not start, return the key
switch to OFF, wait for at least 2 minutes and
restart the engine.
1. To provide against unexpected behavior of the
machine, set the engine speed control dial (1) to the
low position.
2. Make sure that the preheat lamp on the display is off.
Turn the key (2) to the START position. The engine
starts.
3. Release the hand from the key when the engine starts.
The key returns to the ON position automatically.
4. Set the left lever unit to the operation position when
starting operation.

AFTER STARTING THE ENGINE

Never race the engine immediately after starting
•
it. Racing after starting may cause breakdown
of the engine.
Do not accelerate the engine quickly or apply
•
loads to it when the engine water temperature
gauge (1) shows low temperature.
• If some abnormality is found, stop the engine
immediately, find the cause and repair the
defective part.
1. Make sure that all alarm lamps on the display are off.
2. Check if engine exhaust color, sound and vibrations
are not abnormal.
3. After the engine has started, perform a warm-up
operation (described later).
IC75-2 ENG
OPERATION
NOTICE
NOTICE
(Not used)
3-3
Low
speed