Water Separator And Fuel Filter - IHI IC75-2 Operation Manual

Water Separator and Fuel Filter

When performing the inspection and maintenance of the fuel filter, lifting the vessel will facilitate
work.
Be sure to set the safety bars under the vessel
•
when carrying work with the vessel raised.
Spilt fuel may cause a fire. Wipe it off
•
completely if it spills.
Draining water separator
Discharge water and sediment contained in fuel from the
water separator (1) everyday.
1. Place the machine on a flat and firm location and then
stop the engine.
2. Open the drain valve (2) of the water separator by
hand. When the valve is rotated by about 3.5 turns, the
valve lowers by 25.4 mm and draining starts.
3. Discharge water and sediments until clear fuel comes
out.
4. Once clear fuel comes out, close the valve.
Open
IC75-2 ENG
MAINTENANCE
4-28
Posture for checking the fuel filter
Close