Table of Contents
Advertisement
Adjustment of Reverse Start
If the machine travels diagonally either to the right or the
left when starting to travel or the sensitivity of the joystick
is not completely normal, adjust Reverse Start on this
screen.
Trim
Adjusts the balance between the initial speeds of the right
and left travel motors in order to eliminate diagonal travel
when starting to travel.
[+] key:
Adjust in the right direction. (Slows down the
initial speed of the right travel motor.)
[-] key:
Adjust in the left direction. (Slows down the
initial speed of the left travel motor.)
Start
Adjusts the sensitivity of the joystick when starting to
travel.
[+] key:
The response to joystick input gets faster.
[-] key:
The response to joystick input gets slower.
The adjustment of Reverse Start affects the feeling
of the brake during reverse pivot turn and forward
travel. Therefore, make this adjustment carefully.
Tilt zero adjust
(Tilt Zero Adjust Screen)
Install the IC75 on a level place and then press the
[ZERO] button to adjust.
Bright/Contrast
(Brightness and Contrast Adjustment Screen)
Bright (Brightness)
Pressing the [+] key makes the screen display brighter
and pressing the [-] key makes it darker.
Contrast
Pressing the [+] key makes the contrast higher and
pressing the [-] key makes it lower.
IC75-2 ENG
CONTROLS
2-15
Advertisement
Chapters
Table of Contents
