Operator Seat - IHI IC75-2 Operation Manual

OPERATOR SEAT

Sit on the seat and adjust it to allow free lever operations.
• Adjusting tilt
Move the seat back while pulling the lever (1) to adjust
the angle of the seat back.
• Adjusting the back-and-forth position
Move the seat forward or backward while pulling the
lever (2) to adjust the back-and-forth position.
• Adjusting suspension
Raise the lever (3) and turn it to adjust suspension.
The appropriate body weight is displayed on the
display (4).
• Adjusting the seat height
When the seat is lifted from the bottom of the seat (5),
the seat height is raised by 30 mm (a maximum of 60
mm).
To return the seat to the original height, lift the seat
from the bottom of the seat to the maximum height, lift
it again and then lower it.
Do not adjust the seat while driving. Sudden
•
seat movement can cause operating errors or
unforeseen accidents.
Shake the seat back and forth lightly and check
•
if the seat is fixed firmly after adjusting it. If the
seat is not fixed, it may move suddenly and
cause unforeseen accidents.
IC75-2 ENG
CONTROLS
2
2-24
5
3
4
1
CA-C200321