IHI IC75-2 Operation Manual page 22

18. Sign indicates a hazard
of falling out when
machine goes over an
obstacle.
Read manual and follow
instructions for safe and
proper operation.
(D405 368 00)
20. Sign indicates an
explosion hazard.
Never drill, cut with gas,
hit or disassemble. Also,
keep open flame away.
(D405 362 00)
22. Sign indicates a crush hazard from falling
vessel.
Read manual and follow safety instructions
when holding the vessel in a raised position.
(D405 487 00)
23. Sign indicates a hazard of being run over by
moving equipment.
Keep away from equipment when it is
moving.
(D405 488 00)
IC75-2 ENG
SAFETY
19. Sign indicates a
hazard of a flying plug
from track adjuster
that could cause
injury.
Read manual before
adjusting track for
safe and proper
handling.
(D405 485 00)
21. Sign indicates the
necessity of fastening
the seat belt.
Always keep the seat
belt fastened while
operating the machine
to minimize danger
caused by accidents
such as falling down.
(D407 774 00)
24.
Attach a DO NOT OPERATE warning
tag to start switch or controls before
servicing or repairing the machine.
Do not start the engine or move any of
the controls if there is DO NOT
OPERATE or similar warning tag
attached to the start switch or controls.
(D405 323 00)
1-15