IHI IC75-2 Operation Manual page 11

DO NOT TRAVEL WITH THE VESSEL IN DUMP
POSITION
Traveling with the vessel in dump position not only makes
the machine unstable but limits operator visibility causing
hazardous situations.
Never attempt to travel with the vessel in dump position.
DO NOT OVERLOAD
• Working with loads exceeding the performance of the
machine can cause loss of safety or reduction in the
functionality or life of the machine.
• Never exceed the maximum load limits.
• Never place a load onto the sideracks.
DO NOT EXCEED THE WATER DEPTH LIMIT
• The acceptable water limit is up to the lower roller.
Check the water depth, foundation and strength of
water current and other safety factors before operating.
Do not place the machine in locations exceeding the
lower frame of the machine.
• If the machine goes into water in a descending posture
on a steep slope, water may splash on the radiator and
peripheral parts, resulting in damages of the radiator
fan. Be careful.
DO NOT TRY TO TRAVEL OVER OBSTRUCTIONS
Trying to travel over obstacles could cause the machine
to lose its balance and topple over.
Avoid potential obstacles in your path.
IC75-2 ENG
SAFETY
1-4
Allowable water depth