Use Of Safety Bar - IHI IC75-2 Operation Manual

USE OF SAFETY BAR

ALWAYS use the safety bar to prevent personal
injury or death, when maintenance under the raised
vessel. Use the safety bar when underneath the
vessel which has been raised.
Setting the safety bar
1. Raise the vessel completely.
2. Raise the safety bar and set it to the bracket under the
vessel.
Do not start the engine or lower the vessel while
the safety bars are used.
Such an action may cause breakage of the safety
bar or vessel.
Removing the safety bar
1. Raise the vessel completely.
2. Remove the safety bar from the bracket and store the
bar onto the frame.
IC75-2 ENG
MAINTENANCE
When the safety
bar is stored
4-2
When the safety
bar is stored
Vessel
Frame
When the safety
bar is set.