Before Starting The Engine - IHI IC75-2 Operation Manual

BEFORE STARTING THE ENGINE

1. Sit on the seat, adjust it to allow free lever operations,
and fasten the seat belt.
2. Make sure that the left lever unit (1) is set at the lock
position.
3. Make sure that the joystick lever (2) is set at the
neutral positions.
4. Insert the key into the engine key switch (3), turn it to
the ON position, and check the following:
• The display turns on. Make sure that the model
name is correct.
• Engine preheating starts automatically. Make sure
that the preheat lamp (4) is lit and goes out then.
The lighting time of the preheat lamp varies with the
water temperature.
• Make sure that the battery voltage display is normal
(approximately 24 V).
• Make sure that the mark lamp of the parking switch
(6) is on.
• Turn the headlight switch of the combination switch
(7) and make sure that the headlights go on.
• Turn the turn signal switch of the combination switch
(7) and make sure that the turn signal lamps flashes.
• Push down the combination switch (7) and the horn
button (8) of the joystick and make sure that the horn
sounds.
Ask IHI's sales service dealer for repair services, if some
abnormality is found in the above check.
IC75-2 ENG
OPERATION
Operation position
3-2
Lock position
(Not used)