Trouble Code Display Screen - IHI IC75-2 Operation Manual

Trouble Code Display Screen

No.
1 Engine stop indicator
2 Engine system warning indicator
3 Battery charge warning indicator
4 Water separator warning indicator
5 Engine oil pressure warning indicator
6 Air cleaner clogging warning indicator
7 Coolant temperature warning indicator
8 Coolant level warning indicator
9 Trouble code display
10 Engine stop extension key
1. Engine stop indicator
• This indicator comes on when a post-processing unit or
engine failure is detected while the engine is running.
• This indicator flashes when an imminent abnormality is
detected and the engine automatically stops 30
seconds later.
When the engine stop indicator flashes comes on or
flashes, move to a safe area and stop the engine
immediately.
Repair is required once the engine is stopped. Please
contact IHI or our sales service dealer.
2. Engine system warning indicator
This indicator comes on when an abnormality is detected
in the post-processing unit or the engine when the engine
is running. Stop the engine and inspect it.
Also, please report the contents of the trouble code
display to IHI or our sales service dealer.
3. Battery charge warning indicator
This indicator comes on when an abnormality is found in
the charge system while the engine is running. If this
indicator comes on while the engine is running, loose fan
belt may be the cause. Stop the engine and check the fan
belt tension.
4. Water separator warning indicator
This indicator comes on when water accumulates up to
the designated level of the water separator. When this
comes on, stop the engine and drain the water from the
water separator.
IC75-2 ENG
CONTROLS
Name
2-8