Automatic Mode - IHI IC75-2 Operation Manual

Automatic Mode

In the automatic mode, the travel speed is controlled mainly using the joystick.
Because the engine revolutions are linked automatically, the operator can concentrate on the
travel operation.
1. Joystick
The joystick is used to perform travel operation and dump operation.
In the automatic mode, the engine revolutions are automatically linked according to the
amount of each operation.
Dump operation
2. Accelerator pedal
Combined with the joystick, the accelerator pedal
adjusts the travel speed of the machine.
When using the accelerator pedal, tilt the joystick lever
all the way toward the direction of travel and adjust the
travel speed with the amount of step on the accelerator
pedal; thereby the operator can operate the machine
with the feeling of driving an automobile.
IC75-2 ENG
OPERATION
Travel operation
While holding down
3-11