Mode Changeover Switch (085831444); Engine Speed Control Dial; Travel Speed Control Dial - IHI IC75-2 Operation Manual

4. Mode changeover switch
This makes switching between the automatic mode and
the manual mode.
Automatic mode: Press the side without the mark. The
mark indicator lamp goes off.
Manual mode: Press the indicator lamp side. The
indicator lamp goes on.
For more information about travel modes, see the
OPERATION section, page 3-10.
5.

Engine speed control dial

• Automatic mode:
Adjust the minimum engine speed.
High speed: Rotate the dial clockwise.
Low speed: Rotate the dial counterclockwise.
• Manual mode:
This mode adjusts the number of engine revolutions.
High speed: Rotate the dial clockwise.
Low speed: Rotate the dial counterclockwise.
6.

Travel speed control dial

• Automatic mode:
This mode adjusts the travel speed of the machine.
High speed: Rotate the dial clockwise.
Low speed: Rotate the dial counterclockwise.
• Manual mode:
This mode is not used.
IC75-2 ENG
CONTROLS
Low speed
Low speed
2-17
High speed
CA-C201040
High speed