Engine Oil System; Check The Engine Oil Level - IHI IC75 Operation Manual

ENGINE OIL SYSTEM

Check the engine oil level

1. Open the engine cover, pull out the oil level gauge (1),
and remove oil with waste cloth.
2. Insert the oil level gauge fully into the oil level pipe and
pull it out.
3. The oil level is proper if oil on the oil level gauge
reaches between the H and L positions.
4. Refill engine oil through the filler port (2) if the oil level
is below the L level. Wait for approximately 15 minutes
after refilling, and check the oil level.
5. If the oil level is proper, close the lubrication port firmly
and close the engine cover.
6. Too much engine oil may cause engine troubles. Be
careful.
IC75 ENG
MAINTENANCE
4-17
Engine cover