IHI IC75-2 Operation Manual page 46

Engine start/stop button (4)
The engine can be started by pressing the switch button
(4) while the engine key switch is at the ON position.
The engine can be stopped by holding down this button
while the engine is running.
Horn button (5)
You can sound the horn by pressing the horn button (5).
Spin turn button (6)
Spin turn operation can be performed by operating the
joystick laterally while holding down the switch button (6).
For more information about spin turn operation, see the
article on "Steering control" in the OPERATION section.
Turning ON the engine key switch while holding down the
spin turn button switches the mode to the spin turn mode.
Once the spin turn mode is activated, spin turn operation
is enabled without pressing the spin turn button.
Accelerator pedal
• Automatic mode:
This mode adjusts the travel speed of the machine.
• Manual mode:
This mode adjusts the number of engine revolutions.
For more information about accelerator pedal operation,
see the article on "TRAVEL MODES" in the OPERATION
section.
IC75-2 ENG
CONTROLS
2-23