Engine Starting; After Starting The Engine - IHI IC75 Operation Manual

ENGINE STARTING

•
Make sure that there are no persons or
obstacles around the machine and sound the
horn before starting the engine.
•
Be sure to sit on the seat when starting the
engine.
Do not turn on the starter motor for 20 seconds or
more. If the engine does not start, return the key
switch to OFF, wait for 30 seconds and restart the
engine.
1. Move the gate lock lever to the free position.
2. Set the engine throttle dial to the low position.
3. Make sure that the glow lamp is off. Turn the key to
the START position. The engine starts.
4. Release the hand from the key when the engine starts.
The key returns to the ON position automatically.

AFTER STARTING THE ENGINE

•
Never race the engine immediately after starting
it. Racing after starting may cause breakdown
of the engine.
•
Do not accelerate the engine quickly or apply
loads to it when the pointer of the engine water
temperature gauge (1) shows a temperature in
the white zone.
•
If some abnormality is found, stop the engine
immediately, find the cause and repair the
defective part.
1. Checking monitor functioning
Make sure that all lamps (2) on the monitor are off.
2. Check if engine exhaust color, sound and vibrations
are not abnormal.
IC75 ENG
OPERATION
CAUTION
IMPORTANT
IMPORTANT
Locked
3-3
Free