Figure 4-3 Set The Connection Port In The Local Configuration - H3C VG 10-40 Installation Manual

Installation Manual
H3C VG 10-40/10-41 Voice Gatewa

Figure 4-3 Set the connection port in the local configuration

2) Set the serial interface parameters. As shown in Figure 4-4,
in the properties dialog box of the serial interface, set baud
rate to 9600, data bits to 8, parity to none, stop bits to 1 and
flow control to none, and click the <OK> button to return to
the HyperTerminal interface.
y Chapter 4 Booting and Configuration
4-3