Table of Contents
Advertisement
Installation Manual
H3C VG 10-40/10-41 Voice Gateway
Chapter 6 Troubleshooting
6.1 Power System
Symptoms:
The PWR LED cannot light.
Troubleshooting:
Please check that:
The power switch of the VG is turned on.
The power cord of the VG is correctly connected.
The proper power supply is adopted for the VG.
Caution:
Do not plug or unplug the power cord with the VG powered on. If the
PWR LED does not light up after you have taken all the steps above,
please contact your local dealer.
6.2 Configuration System
After the POST of the VG, if the system operates normally, the
start-up information should be displayed on the console terminal; if the
configuration system has some faults, the terminal will display nothing
or only illegible characters.
Chapter 6 Troubleshooting
6-1
Advertisement
Table of Contents
