Powering On The Vg; Figure 4-5 Set Terminal Type - H3C VG 10-40 Installation Manual

Installation Manual
H3C VG 10-40/10-41 Voice Gateway

Figure 4-5 Set terminal type

4.1.2 Powering on the VG

I. Checking before power-on
Before powering on the VG, check that:
Both the power cord and the grounding wire are correctly
connected.
Proper power supply voltage is used.
Console cable is correctly connected, and the configuration
PC/console terminal has been started and the concerned
parameters have been set on it.
Chapter 4 Booting and Configuration
4-5