Figure 3-2 Bottom Of The Vg - H3C VG 10-40 Installation Manual

Installation Manual
H3C VG 10-40/10-41 Voice Gateway
Step 1: Install the four pan-head screws on a wall or other flat
vertical surface in consistency with the locations of the four brackets at
the bottom of the VG shown in the following figure, ensuring that the
screw heads protrude 6.0mm from the wall surface (or other vertical
surface).

Figure 3-2 Bottom of the VG

Step 2: Hang the VG on the screws with the four brackets.
3.3 Connecting Grounding Wire
Warning:
Properly connect the grounding wire before connecting other cables. It
is recommended to shorten the grounding wire as much as possible to
prevent the VG and the peer device getting damaged during periods of
lightning activity.
3-3
Chapter 3 Installation