Tools & Parts - Maytag Commercial MLE27PD Installation Instructions Manual

Tools Needed:
8" (200 mm)
or 10" (250 mm)
Pipe wrench
Torx T-20 security
® ®†
screwdriver or bit
Level
Caulk gun and caulk
(for installing new exhaust vent)
Flashlight (optional)
Parts Supplied:
Security cotter pins (2)
(Located in Bag inside
the drum)
† ® TORX and T20 are registered trademarks of Acument Intellectual Properties, LLC.
8" (200 mm) or 10" (250 mm)
Adjustable wrench
that opens to 1" (25 mm)
1" (25 mm) Hex-head
socket wrench
Utility knife
Vent clamps
1" (25 mm)
Open-end wrenches
Foot Boots (4)
(Located in Bag
inside the drum)
Flat-blade screwdriver
5/16" (8 mm) Socket wrench
1/4" (6 mm) Nut driver
Pipe-joint compound
suitable for gas type
Ruler or measuring tape
Leveling Legs (4)
(Already Installed
on your Dryer)
TOOLS & PARTS TOOLS & PARTS
Phillips screwdriver
Pliers (that open to
1 9 / " [39 mm])
16
27" (686 mm)
Wood block
Putty knife
5