Maytag Commercial MLE27PD Installation Instructions Manual page 12

ELECTRIC DRYER ELECTRICAL REQUIREMENTS (CANADA ONLY) ELECTRIC DRYER ELECTRICAL REQUIREMENTS (CANADA ONLY)
Direct Wire
If connecting by direct wire:
Direct wire cable must match power supply (4-wire or 3-wire)
and be:
Cable must be rated to 60 A minimum.
■
Flexible armored cable or nonmetallic sheathed copper cable
■
(with ground wire), covered with flexible metallic conduit.
All current-carrying wires must be insulated.
6-gauge minimum solid copper wire (do not use aluminum).
■
At least 5 ft. (1.52 m) long.
■
12