Maytag Commercial MLE27PD Installation Instructions Manual page 30

ELECTRONIC CONTROL SETUP INSTRUCTIONS ELECTRONIC CONTROL SETUP INSTRUCTIONS
Code Explanation
7. 00 SPECIAL PRICE START HOUR
NOTE: Uses military time or 24 hr. clock.
7. 00 This is the start hour; 0–23 hours.
•
Select START HOUR by pressing the WHITES AND
COLORS button.
•
Press the PERM. PRESS button once to advance
to next code.
8. 00
SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock.
8. 00 This is the stop hour; 0–23 hours.
•
Select STOP HOUR by pressing the WHITES AND
COLORS button.
•
Press the PERM. PRESS button once to advance
to next code.
9. 10 SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether special
pricing is selected for that day. A number followed by
"0" indicates no selection that particular day (9.10). A
number followed by an "S" indicates selected for that
day (9.1S). Days of the week (1–7) are selected by
pressing the WHITES AND COLORS button. Press the
DELICATES button once to select special pricing for each
day chosen.
When exiting set-up code "9," the display must show the current
day of week:
DISPLAY DAY OF WEEK
10 Day 1 = Sunday
20 Day 2 = Monday
30 Day 3 = Tuesday
40 Day 4 = Wednesday
50 Day 5 = Thursday
60
Day 6 = Friday
70 Day 7 = Saturday
•
Press the PERM. PRESS button once to advance
to next code.
A. 00 VAULT VIEWING OPTION
This option is either NOT SELECTED "OFF"
or SELECTED "ON."
In Mode A if it is set to SC, you can view money and/or cycle
counts when the coin holder box is removed.
A. 00 Not Selected "OFF."
A. SC Selected "ON."
•
Press the DELICATES button once to change this
selection. When selected, the money and/or cycle
counts will be viewable (if counter option(s) is
selected) when the coin box is removed.
•
Press the PERM. PRESS button once to advance
to next code.
30
Code
b. 05
Mode b is where you set up how much 1 coin value is in nickles for
coin1 input-this is the default (ie. 05=$0.25).
b. 05
C. 20
Mode C is the same as b, however this is the set up for Coin 2
input value in nickels. (this is for two different coins, if you have
a $1.00 coin and $0.25 coin) otherwise the Coin 1 is set for all
models and defaults to 1 quarter or $0.25.
C. 20
E. 00
MODE E allows you to change display to show how many coins
left to add to start cycle or the price to add for the cycle.
E. 00
CODE (selected)
E. AC
1S
2S
3S
4S
5S
6S
7S
Explanation
VALUE OF COIN 1
•
By pressing the WHITES AND COLORS button, there
is an option of 1–199 nickels.
•
Press the PERM. PRESS button once to advance
to next code.
VALUE OF COIN 2
This represents the value of coin 2 in number of nickels:
20 = $1.00.
•
By pressing the WHITES AND COLORS button, there
is an option of 1–199 nickels.
•
Press the PERM. PRESS button once to advance
to next code.
ADD COINS OPTION
This option is either NOT SELECTED "OFF" or
SELECTED "ON." This option causes the customer
display to show the number of coins (coin 1) to enter,
rather than the dollars-and-cents amount. The number
in the display changes as the coins are accepted.
Not Selected "OFF."
Selected "ON."
•
Press the DELICATES button 3 consecutive times
to change this selection.
•
Press the PERM. PRESS button once to advance
to next code.