Table of Contents
Advertisement
S e c t i o n 1 . 7
C o n f i g u r i n g T h e M D r i v e S p e e d C o n t r o l
S e c t i o n O v e r v i e w
This section applies to all MDrive Speed Control Versions. The software
utility is the only method for configuring your MDrive Speed Control. This
section will acquaint the user with the following:
T h e I M S A n a l o g S p e e d C o n t r o l U t i l i t y
The IMS Analog Speed Control is accessed through the IMS SPI Interface
which is an easy to install and use software program. Use of this utility and
the optional 6 foot MD-CC100-000 Parameter Setup Cable is the suggested
method of configuring the MDrive17 and MDrive23 Speed Control. The SPI
Interface is included on the CD that ships with the MDrive or is available for
download at www.imshome.com.
I n s t a l l i n g t h e I M S S P I I n t e r f a c e
NOTE: IMS recommends that you install the latest version of the SPI
Interface which is backward compatable and ensures compatability with the
latest MDrives.
S y s t e m R e q u i r e m e n t s
I n s t a l l a t i o n
Please refer to Section 1.4 "Installing the IMS SPI Interface" and follow steps
1 through 5.
50
Easy installation.
Ease of use via single screen interface.
Automatic communication configuration.
Will not allow out-of-range values to be set.
Tool-tips display valid range settings for each option.
A Pentium Class or Higher IBM Compatible PC.
Windows 9x (95/98) or Windows NT (Windows NT4.0 SP6,
Windows 2000 SP1, Windows XP).
10 MB hard drive space.
A free parallel communications port.
Advertisement
Table of Contents
