Figure 1.4.1 The Ims Cd Main Index Page; Figure 1.4.2 The Ims Cd Software Selection Page; Figure 1.4.3 The Spi Setup Dialog Box - IMS MDRIVE 17 Operating Instructions Manual

28
1) After the CD starts, the IMS Main Index Page will be displayed.
Figure 1.4.1: The IMS CD Main Index Page
2) Place your mouse pointer over the MDrive Icon. The Icon wil be
highlighted and the text message "MDrive Integrated Motor &
Electronics" will be displayed. This verifies you have selected
the correct software.
3) Click the MDrive Motor Icon. This opens the MDrive Software
Selection Page.
Figure 1.4.2: The IMS CD Software Selection Page
4) Place the mouse pointer over the menu and select SPI Interface
(Win9x) or SPI Interface (WinNT). The displayed text will again
verify your selection. Click your selection and the "Setup" dialog
box will be displayed.
Figure 1.4.3: The SPI Setup Dialog Box
5) Click SETUP in the Setup dialog box and follow the on-screen
instructions.
Once the SPI Interface is installed and started the
Communications Settings will be set automatically.