Changing Parameters; Illegal Parameters/Tool Tips; Figure 1.4.5 Typical Mdmc Gui; Figure 1.4.6 Changing The Parameter Settings - IMS MDRIVE 17 Operating Instructions Manual

G U I f o r " C " C o n n e c t o r
Version Number
Connection Status & Port
Figure 1.4.5: Typical MDMC GUI
NOTE: The following functions are applicable to all GUI versions.
C h a n g i n g P a r a m e t e r s
When a Parameter is changed, the font color will change to blue and the "Set"
button will be activated. The change will not take place until Set is clicked.
Parameter changes turn blue...
...then click "Set"
Figure 1.4.6: Changing the Parameter Settings
I l l e g a l P a r a m e t e r s / T o o l T i p s
If an illegal parameter is entered it will be displayed in red. By placing the
mouse pointer over the parameter the "Tool Tips" dialog will be displayed.
The range for that parameter will be shown in the dialog box.
NOTE: The Tool Tips are always functional.
30