Table of Contents
Advertisement
To MDrive
MD-ADP-1723C
Adapter Cable
To Customer PC
Parallel/SPI Port
DB-25
MD-CC100-000
Parameter Setup Cable
ADP-3512-FL
Prototype Development Cable
Figure 1.6.1: Typical Setup, Adapter, and Prototype Development
P a r a m e t e r S e t t i n g
The MD-CC100-000 Setup Cable is 6 feet in length and connects to the
MD-ADP-1723C Adapter Cable and to the Customer PC Parallel/SPI Port.
This allows the customer to setup the desired parameters of the MDrive. The
Adapter Cable plugs into the C Connector of the MDrive17/23.
P r o t o t y p e T e s t i n g
The ADP-3512-FL Prototype Development Cable connects to the MD-ADP-
1723C Adapter Cable and has "flying leads" for the customer to make
connections to his interface for testing and development of the MDrive17/23.
The Prototype Development Cable can also be connected directly to the
MDrive17/23 as the permanent customer interface.
44
12
TM
12
ADAPTER P/N
MD-ADP-14C
11
P1
P2
Cable Connections for MDrive17/23 with C Connector
1
2
1
To Customer
Interface
Approx Length
12" (304.8mm)
MD-ADP-1723C
Approx Length
12" (304.8mm)
ADP-3512-FL
Approx Length
6 Feet (1.8 M)
MD-CC100-000
Advertisement
Table of Contents
