Table of Contents
Advertisement
ALERT SETTINGS:
Pressing this option allows you to set con-
ditions for several features.
The numbers left of the boxes indicate the
current setting. They can be changed by
pressing the "-" or "+" buttons.
Filter Reminder Cycles: This sets the num-
ber of cook cycles between each oil filter
cycle. The Broaster Company recommends
5 cook cycles however, you can set it as
you desire. A setting of "0" will disable the
filter reminder screen.
Alert Volume: This should be set loud
enough to be able to hear it above any
other noises in the kitchen.
Keypad Volume: It should be loud enough
to hear while making changes in front of the
fryer or when operating the fryer.
Tone: There are a range of tones from low
to very high. Chose the one that suits your
operation.
Stir/Agitate Reminder: This alert appears
when 3 conditions occur.
1. When the fryer is first turned on in the
morning, this reminder will appear after the
oil comes up to the set temperature.
2. After a filter cycle has been completed
6-12
broaster.com Manual #20932 05/19 Rev: 05/19
this reminder will appear after the oil comes
up to the set temperature.
3. If the fryers has been setting idle for 2
hours or longer this reminder will appear to
alert you to stir the oil to get it to a uniform
temperature.
Pressure Release at end of Cycle: This
setting allows the pressure to release
before the cooking time reaches zero.
Drain Plugged Warning: This controls
whether the unit warns the operator that the
drain may be clogged.
Incomplete Evac. Warning: This controls
whether the unit warns the operator that the
oil may not have fully returned to the cook-
ing well after the auto-filter evacuation time
has expired.
After making the adjustments on this dis-
play press the green OK button to save the
entries.
To go back to the Cook display either press
the "Exit Setup" button or the Cook Tab.
Advertisement
Table of Contents
