Table of Contents
Advertisement
Position Edit:
To change the position of this item on the
menu list, press the Edit / Enter Preset
Number bar and a number pad will appear.
Enter the number of the position you want
this item to appear at then press the ENTER
key.
Time & Temperature Edit:
Most of the cooking will be done on stage
1. To edit this feature press the button and
a number pad will appear. Enter the desired
cooking temperature or time and press the
ENTER button. If a number is entered and
the ENTRY button is not pressed within 30
seconds the number pad will disappear and
no changes will be saved.
Comp On / Off:
This button toggles Auto Comp on or off.
Active:
This button allows the item to be shown in
the preset menu list of the Cook Tab. If the
button says Yes the item appears on the list
if No it does not.
You can quickly tell when a product is not
active because the name and number of the
item will be greyed out.
ADD NEW:
Pressing this button opens a display to
enter a new product to the menu list. This
display is similar to the Edit display except
all information must be added.
6-10
broaster.com Manual #20932 05/19 Rev: 05/19
To enter the name press the Edit / Enter
Preset Name bar and enter the name of the
new product.
The Preset Number automatically defaults
to the next number after the last item on the
list. This can be changed by pressing the
Edit / Enter Preset Number bar and entering
the number where you want this item to
appear.
Set the cook temperature, cook time, and
pressurized / non-pressurized the same
way as when editing a preset.
Set Auto Comp and Activity accordingly.
Press the green OK button to save the new
product.
Menu Transfer:
The Smart Touch control allows a revised
menu to be transported from one fryer to
other fryers which also have a Smart Touch
control. This is done from the Preset tab
using the Load Menu and Export Menu but-
tons along the top of the display.
Advertisement
Table of Contents
