Table of Contents
Advertisement
Quick Links
Portable Holding Cabinet
Installation & Operating Manual
This
manual
contains
information concerning the maintenance, use
and operation of this product. Failure to follow
the instructions contained in this manual may
result in serious injury. If you're unable to
understand the contents of this manual, please
bring it to the attention of your supervisor. Do not
operate this equipment unless you have read
and understood the contents of this manual.
Perfect Hold
important
safety
™
Ester manual contiene importante información
sobre seguridad concerniente al mantenimiento,
uso y operación de ester producto. Cualquier
falla en el seguimiento de las instrucciones
contenidas en ester manual puede resultar en un
serio daño. Si usted no puede entender el
contenido de ester manual por favor pregunte a
su supervisor. No opere ester equipo al menos
que haya leído y comprendido el contenido de
ester manual.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Broaster Perfect Hold
Summary of Contents for Broaster Perfect Hold
- Page 1 Perfect Hold ™ Portable Holding Cabinet Installation & Operating Manual This manual contains important safety Ester manual contiene importante información information concerning the maintenance, use sobre seguridad concerniente al mantenimiento, and operation of this product. Failure to follow uso y operación de ester producto. Cualquier...
-
Page 2: Table Of Contents
WARNING means there is the possibility of serious personal injury or death to yourself or others. The Perfect Hold cabinet’s air flow pattern is designed CAUTION means there is the possibility of minor or to maintain consistent cabinet temperature without moderate injury. -
Page 3: Important Safety Instructions
If service is required on this unit, contact your and is a minimum of 70° F (21° C). authorized Broaster ® distributor, or The Broaster Company's Service Department at The unit must be transported in an upright 800-367-0645 or 608-365-0195; fax 608-365- position. 5158. -
Page 4: Model Description
MODEL DESCRIPTION The Perfect Hold™ Portable Holding Cabinet has a stainless steel finish (all sides) and features thermostatically controlled heat, a digital temperature readout, and a large, insulated, aluminum-framed stainless steel door. The access door can be hinged left or right. Electrical components, and controls are easily accessible. -
Page 5: Specifications
Voltage Hertz Watts Amps Plug Configuration Shipping Weight 1447 12.0 NEMA 5-15P* 168 lbs. (76 kg) Perfect Hold 1447 CEE 7/7 Schuko 168 lbs. (76 kg) 1447 BS-1363 168 lbs. (76 kg) 1447 AS-3112 168 lbs. (76 kg) 220-230 (CE) -
Page 6: Dimensions
Width Depth Height Model 22-3/4" 29-1/2" 35-1/8" Perfect Hold (578 mm) (749 mm) (892 mm) Top Surface: 22-3/4"W x 25-7/8"D (578 x 657 mm) Cabinet Opening: 18-1/4"W x 22-1/8"H (464 x 562 mm) Figure 3. Overall Dimensions Part No. 16524... -
Page 7: Installation
INSTALLATION Perfect Hold™ Portable Holding Cabinets are shipped 5. Carefully lay the unit on its side. Thread one leg with most components installed and ready for or mount caster using hardware provided onto operation. The following installation instructions must the cabinet bottom and tighten securely. -
Page 8: Reversible Access Door
INSTALLATION REVERSIBLE ACCESS DOOR Doors are shipped from the factory mounted on the cabinet left side, opening from the right. Doors can be reversed to open from the left, as follows: 1. Remove screws securing door to hinges. (See Figure 5.) 2. -
Page 9: Operation
OPERATION Figure 6. Control Panel 1. Plug unit into a properly grounded electrical 3. Set the Temperature Control to the desired level. outlet of the correct voltage, size and plug See the FOOD HOLDING GUIDE (page 8) for configuration. See SPECIFICATIONS (page 3) recommendations. -
Page 10: Food Holding Guide
OPERATION FOOD HOLDING GUIDE The recommended setting for Genuine Broaster ® than 2 hours. If you still have product in the unit past products is 4.5 to 5. This will maintain Genuine the recommended holding time, use product in Broaster Chicken ®... -
Page 11: Maintenance
MAINTENANCE GENERAL CLEANING Perfect Hold™ Portable Holding Cabinets are To preserve the bright finish of the unit, it is designed for maximum durability and performance, recommended that the exterior and interior surfaces with minimum maintenance. be wiped daily with a damp cloth. Food pans should be removed and washed. - Page 12 Replacement Parts are If service is required on this unit, contact your specified to operate safely in the environments authorized Broaster distributor or contact The in which they are used. Some aftermarket or Broaster Company's Service Department at 800- generic replacement parts do not have the 367-0645 or 608-365-0193;...
-
Page 13: Accessories
DUMP TOP ACCESSORY A dump top accessory is available. This accessory Figure 7. Stacking Kit allows the top surface of the Perfect Hold unit to be used as a dump station for cooked product, providing additional functionality while making it an even more valuable component to place next to your ®... -
Page 14: Limited Warranty
Subject to the terms and conditions of this warranty, The foregoing warranty is made in lieu of all The Broaster Company (Company) warrants that all other warranties, express or implied, and the equipment and parts manufactured or sold by the... - Page 15 NOTES Part No. 16524...
- Page 16 , Broaster Chicken ® , Broaster Foods ® , and Broasterie ® are registered trademarks. Usage is available only to licensed operators with written authorization from The Broaster Company. • 1-800-367-0645 www.broaster.com ©2006 The Broaster Company 8/06 16524 Printed in U.S.A.
Need help?
Do you have a question about the Perfect Hold and is the answer not in the manual?
Questions and answers