Broaster G Series Operation Manual page 16

Temperature Display:
The temperature is indicated next to the
thermometer.
When the fryer is turned on in the morning
this box will be yellow and "Heat On" will be
displayed. The temperature will alternate
between "LOW" and the set temperature
until the oil temperature reaches the set
temperature.
There are other times when this will occur;
1. Anytime the temperature is changed.
2. After a filtering cycle.
3. When a preset is selected and the oil
temperature is not at the preset tempera-
ture.
In any of these cases when the oil tempera-
ture reaches the set temperature the box
turns green indicating the oil is up to the set
temperature.
The temperature shown in this box can be
either the "Set" temperature of the "Actual"
temperature as indicated above the ther-
mometer. To change from one to the other
press anywhere in the box for 3 seconds.
An alert will sound when you press the box
and a second alert will sound when the
change is made.
To set the temperature, press the tempera-
ture box twice and a keypad will appear.
Enter the temperature for the product you
want to cook, as you enter the temperature,
it will appear above the keypad. To save this
temperature press the enter key.
6-3
broaster.com Manual #20932 05/19 Rev: 05/19
Select Preset Display:
There are 2 "Select Preset" boxes.
All of Broaster Company's products are pre-
loaded into the memory of the control and
can be selected when you want to cook
that product. The cook time and cook tem-
perature for that product will be automati-
cally entered in the Time and Temperature
displays.
To select a product, press either preset box
and a menu of the products will be dis-
played. Tap the product you wish to select.
If the wrong product comes up, don't worry!
Tap the preset box again and the menu will
reappear.
When the item has been selected a picture
of the item will appear in the left box and a
description of the item will appear in the
right box. When a cook cycle is started the
left box turns yellow and the time remaining
in the cycle is displayed. The picture moves
to the right box.
If the menu item to be cooked uses a differ-
ent temperature the temperature box will
either remain green meaning it is all right to
start a cook cycle or it will turn yellow
meaning the temperature is too low to start
a load. Wait to start a cook cycle until the
temperature is green.
When the temperature is green. Load the
product as recommended and move the
small handle on the top of the fryer from
open to close. This will start the cycle timer
counting down. When the load is done an