Table of Contents
Advertisement
For either of these options set the desired
time by pressing the time button. A keypad
will appear. Enter the desired time. As you
enter the hours and minutes they will
appear above the keypad. When the time is
entered press the green OK button.
Pin Maintenance:
Pressing this option opens the PIN Mainte-
nance display.
Presets:
Pressing this option opens a list of products
with a picture of the product and the
recipes pre-loaded.
This is where the product preset is either
shown or not shown as a preset on the
Cook Tab.
6-9
broaster.com Manual #20932 05/19 Rev: 05/19
By default all products will be shown. To
turn any product off, press the item once
and the Edit/Create Preset display will
appear.
Here you can edit the name of the of the
product, change its position on the list, set
the cook time and temperature, set Auto
Comp to be on or off during the cooking
cycle, whether or not this item should be
active as a preset on the Cook Tab, and
whether its a pressure or non-pressure
recipe.
Creating a new product or deleting a
product on the list will be described later.
Name Edit:
To edit the name of the current product
press the Edit / Enter Preset Name bar and
a typewriter keyboard will appear. The
curser will be at the end of the name. To
change the name press the BACK button
and the cursor will delete the name one
letter each time the BACK button is
pressed.
Delete the letters until you get to the place
where you want to start making the change.
To get the numbers and symbols to come
up press the Symbol key.
When you have completed entering the
changed name press the ENTER key.
Advertisement
Table of Contents
