Operating Your Programmed Remote Controller - Onkyo TX-DS595 Instruction Manual

Operating your programmed remote controller

After performing the procedure given above, the following
modes become enabled for use.
ON
SAT MODE
ENTER/Cursor
button
C H
CH
DISC
AUDIO
TV / VCR
RANDOM
DVD
V 1
V 3
STEREO
SURR
DISPLAY
+10
-- / ---
ON
CABLE MODE
C H
CH
DISC
AUDIO
TV / VCR
RANDOM
DVD
V 1
V 3
STEREO
DISPLAY
-- / ---
40
STDBY
VOL
VOL
MUTING
MUTING
ANGLE SUBTITLE
LEVEL
MENU
OPEN / CLOSE
REC
C D
V 2 T 1 T 2
V 4 TUN P H
DIRECT DSP
1 2 3
Numeric keys
A.ST DSP
4 5 6
SP A SP B Re-EQ
7 8 9
DIMMER ZONE 2
0 ENTER
SEARCH
ENTER
HOME THEATER CONTROLLER
RC-447M
STDBY
VOL
VOL
MUTING
MUTING
ANGLE SUBTITLE
LEVEL
OPEN / CLOSE
REC
C D
V 2 T 1 T 2
V 4 TUN P H
DIRECT DSP
1 2 3
Numeric keys
SURR A.ST DSP
4 5 6
SP A SP B Re-EQ
7 8 9
DIMMER ZONE 2
+10
0 SEARCH ENTER
ENTER
HOME THEATER CONTROLLER
RC-447M
DVD MODE (DVD Player Mode)
Buttons with programmed usage and operations are the same as the
operational buttons on page 36.
SAT MODE (Satellite Tuner Mode)
1. Press the SAT MODE button.
The SAT button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your satellite tuner unit.
The buttons given below have operations programmed
into them.
ON: Turns on and off the satellite tuner unit (same as STDBY button
on the remote controller)
CH : Moves up and down the preset channel numbers
: Moves the cursor
ENTER: Confirms the selection
MENU: Displays the menu
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL : Adjusts the volume at the TX-DS595
MUTING: Activates the muting function at the TX-DS595
CABLE MODE (Cable Mode)
1. Press the CABLE MODE button.
The CABLE button lights green.
2. Press the desired operation button.
The buttons shaded in the figure to the left are the operation
buttons that can be used to control your cable TV unit.
The buttons given below have operations programmed
into them.
ON: Turns on and off the cable TV unit (same as STDBY button on
the remote controller)
CH : Moves up and down the preset channel numbers
0,1 to 9: Numeric keys
ENTER: Confirm
You may also use the following buttons:
VOL : Adjusts the volume at the TX-DS595
MUTING: Activates the muting function at the TX-DS595