How To Send A Saved File - Furuno INMARSAT-C FELCOM 18 Operator's Manual

5.1.3

How to send a saved file

If the file is on an SD card, insert the card in the SD card slot.
1. Close any open files.
2. Press the F3 and 1 keys to show the [Transmit Message] menu.
1. Transmit Message
2. Cancel
3. Request Delivery Status
3. Select [Message File] then press the Enter key.
If necessary, switch the drive, type A: for internal memory or C: for SD card, on
the drive name line.
4. Select a file then press the Enter key. (You can view a part of a file by tapping the
Spacebar. After confirming the contents, press the Esc key.)
Note: When an e-mail with attachment is sent, the file volume increases by 1.5
times because of MIME coding. To lower the charges, select the file to attach from
the [Message File] and select [DATA] from [Code].
5. To send the message to a station registered on the station list, follow from step 4
on page 5-3. To send to a station not listed on the station list, follow from step 3
on page 5-7.
Transmit Message
Priority Normal
Message File
Station Name
Destination Type TELEX/MES
Prefix Code
Country/Ocean Code 82
Destination 65-2111
Modem Type
Address
Subject
Attach File
LES ID 303 (KDDI)
Option ON
Confirmation 00:00
Send Delay Immediate
Delivery Delay IA5
Code
[ TRANSMIT ]
[C:\SEIZOUSE
Filename
Internal Memory
IIT .
JJJ .
R0970714.001
R0970718.001
R0970729.001
SEIZOU .
SEIZOU .TXT
70 Files exist
To View: SPACE Make Dir: INS
5. INMARSAT COMMUNICATIONS
Size
Send
Size Date & Time
<DRIVE>
9078 12-01-08 19:30
13 12-01-28 20:57
4973 12-01-29 05:56
313 12-02-25 00:25
412 12-02-25 07:21
139 12-02-25 06:22
39 12-02-25 21:22
590848 bytes free
Remove Dir: DEL
24
]
5-9