Furuno INMARSAT-C FELCOM 18 Operator's Manual page 37

File Edit Transmit
1:
2:
|
|
MENU
|
|
|
|
|
3) Select [Fore Color].
4) Use ← or → key to select a color.
5) Select [Back Color].
6) Use ← or → key to select a color.
7) To select colors for other windows repeat steps 2)-6).
8) [Brightness] shows current brightness setting. For how to adjust brightness,
see section 2.1.2. See the table on the next page for the default settings for
each preset.
Note: To restore all default color settings, select [Window Color Setup] from
the [Terminal Setup] menu, select [Load Default], press the Enter key then
press the Enter key again.
EDIT
EGC Reports Logs Options
< [1] UNTITLED1 >
CAUTION
3. SYSTEM INITIALIZATION
BASE WINDOW
Setup Distress StopAlarm
MESSAGE
3-5