How To Save Files; How To Open Files; How To Open A File - Furuno INMARSAT-C FELCOM 18 Operator's Manual

• You can prevent writing to the card. On the side that does
not have the cutoff corner, there should be a white switch.
Move the switch down to engage write protect.
4.3.2

How to save files

You can save a message two ways: Save it without losing your place on the screen
(called "save"), or save it before clearing the screen (called "close").
Save file, retain place on screen
1. Press the F1 and 4 keys.
Note: The drive for an SD card is "C" and the drive for the internal memory is "A".
2. Enter a file name. You can not use brackets ([ ]), asterisk (*), comma (,), plus (+),
(;) or equal sign (=).
3. Press the Enter key to save the file and keep it on the screen.
Save file, clear screen
1. Press the F1 and 3 keys. The message "Save this message?" appears.
2. [Yes] is selected; press the Enter key.
3. Enter a file name at the cursor location.
4. Press the Enter key to save the file and clear the screen.
4.4

How to Open Files

4.4.1

How to open a file

1. If the file is on an SD card, insert it in its slot. Press the F1 and 2 keys to show the
list of files.
Note: The drive for an SD card is "C" and the drive for the internal memory is "A".
2. Select a file. To get a partial view of a file, tap the Spacebar. Press the Esc key
to escape.
3. Press the Enter key.
A few moments later the contents of the file appear on the screen and the title bar
shows the file name. You may repeat this procedure to load a second file into a work-
ing area.
Save
[C:\
Filename Size
Internal Memory <DRIVE>
E0970715.001 372 11-12-25 02:52
E0970715.002 6794 11-12-25 02:59
E0970715.003 987 11-12-25 03:10
3 Files exist
To View: SPACE Make Dir: INS
]
Date & Time
579584 bytes free
Remove Dir: DEL
4. FILE OPERATIONS
Protect
switch
4-7