Text Operations - Furuno INMARSAT-C FELCOM 18 Operator's Manual

4. FILE OPERATIONS
4.2.4

Text operations

How to cut and paste text
1. Use the arrow keys to place the cursor on the first character of the text to cut.
2. Highlight the text to be cut by pressing the → key while pressing and holding the
Shift key. You can use the ← or → key to adjust the highlight. The figure below
shows the appearance of highlighted text.
0001 WE ARE CONFIDENT THAT YOU WILL ENJOY MANY YEARS OF OPERATION WITH
0002 THIS INMARSAT STATION CONGRATULATIONS ON YOUR CHOICE
0003 CONGRATULATIONS ON YOUR CHOICE OF FURUNO FELCOM
3. Press the F2 key to open the [Edit] menu.
4. Press the 1 key to select [Cut]. The highlighted text is cut
and the remaining text is reformatted. If you make a mis-
take, you can immediately restore the text by pressing
the Insert key.
5. To move the text to a new location after it has been cut,
place the cursor at the exact spot in the message where
the cut text is to start. When the text cursor is placed cor-
rectly, press the F2 key and then the 3 (Paste) key.
How to copy and paste text
1. Select the text to copy.
2. Press the F2 key to open the [Edit] menu.
3. Press the 2 key to select [Copy]. The selected text is copied to the clipboard.
4. Place the cursor at the exact spot on the message where the copied text is to start.
5. Press the F2 key followed by the 3 key. The text is inserted at the cursor location.
Insert (with Citation)
When you reply to a received message, you can insert ">" in a received message at
the head of the received message to distinguish it from your message.
1. Press the F2 key to open the [Edit] menu.
2. Press the 4 key.
3. Select the file to use. (Use the Spacebar to view content of file. Press the Esc to
close the file.)
4. Press the Enter key.
Select All
Select the entire current file for cut and copy:
1. Press the F2 key to open the [Edit] menu.
2. Press the 5 key.
4-4
<[1] UNTITLED1>
Highlight
Edit
1. Cut DEL
2. Copy ALT-C
3. Paste INS
4. Insert (With Citation)
5. Select All ALT-A
6. Search or Replace
7. Goto Line
8. Time or Pos. Ins
9. Change Window ALT-V