How To Decode An E-Mail Attachment - Furuno INMARSAT-C FELCOM 18 Operator's Manual

4. FILE OPERATIONS
4.10

How to Decode an E-Mail Attachment

When you cannot read an e-mail attachment because it has been coded by MIME
(Multipurpose Internet Mail Extensions), you may decode it as shown below.
1. Save the MIME-coded file to an SD card or the internal memory. (See
section 5.2.5 for the procedure.) This step is not necessary if [Auto Receive Mes-
sage Save] is turned on in the [Auto Mode Setup] menu.
2. Press the F1 and 9 keys to select [MIME (Decode)]. A list of files stored on the SD
card or internal memory appears.
3. Select the file to decode then press the Enter key.
4. [Yes] is selected; press the Enter key to decode the file.
5. To change the file name, press the BackSpace key to erase the file name, enter
a new file name then press the Enter key. After decoding the file the screen looks
something like the one shown below.
6. Long-press the Esc key to return to the standby display.
7. Press the F1 and 2 keys.
8. Select the file selected at step 5 then press the Enter key.
4-10
File chosen
MIME Decode
Checking 'E0970715.001' . . .
Decode 'ABC.ini'?
File attachment
Save
[C:\ABC.ini
Filename Size
Internal Memory <DRIVE>
E0970715.001 372 11-12-25 02:52
E0970715.002 6794 11-12-25 02:59
E0970715.003 987 11-12-25 03:10
3 Files exist
To View: SPACE Make Dir: INS
MIME Decode
Checking 'E0970715.001' . . .
Decode 'ABC.ini'?
Now decoding . . .
Complete.
Decoded 1 file (s).
Press any key to escape.
Decode
Yes No
]
Date & Time
579584 bytes free
Remove Dir: DEL