How To Automatically Print The Communication Log; Egc Messages; How To Display And Reprint Egc Messages - Furuno INMARSAT-C FELCOM 18 Operator's Manual

5. INMARSAT COMMUNICATIONS
5.3.2

How to automatically print the communication log

1. Press the F8 and 5 keys to show the [Auto Mode Setup] menu.
2. Select [Auto Communication Log Print] then press the Enter key.
3. Select [ON] to automatically print the log then press the Enter key.
4. Long-press the Esc key to return to the standby display.
5.4

EGC Messages

When an EGC message is received, "RECEIVING EGC MESSAGE" appears at the
bottom left corner of the display. If "Auto EGC Message Print" in the [Auto Mode Set-
up] menu is ON, EGC messages are automatically printed. EGC messages are auto-
matically received, printed and saved to the terminal unit selected with [EGC Output
Port] on the [System Setup] menu. The memory capacity for EGC messages is 32
Kbytes. When the EGC message memory becomes full, the oldest EGC message is
automatically deleted.
EGC messages can be automatically saved to an SD card or the internal memory. See
section 3.4.4 for details.
5.4.1

How to display and reprint EGC messages

1. Press the F4 and 1 keys to show the [Display EGC Message] screen.
EGC Message --- MET Navarea Warning or MET Forecast ---
Message Sequence No
LES
Priority
Size
Receive Date & Time
ZCZC
NAVAREA XI WARNING
NAVAREA XI 0752.
ARAFURA SEA.
DERELICT F/V PARTIALLY SUBMERGED ADRIFT
IN 10-12.6S 133-19.6E, GEODETIC DATUM
UNKNOWN, AT 180200Z NOV.
CANCEL 0749/02.
Ctrl+P: Print
2. Use the ↑ and ↓ keys to scroll the screen.
3. To print a message, press the P key while pressing and holding down the Ctrl key.
4. Long-press the Esc key to return to the standby display.
EGC messages can be automatically saved to an SD card. See section 3.4.4 for de-
tails.
5-20
Display EGC Message
: 00472
: KDDI
: Urgent
: 285 characters
: 02-11-02 06:08 (UTC)
Ctrl+S: Save : Previous : Next