Furuno INMARSAT-C FELCOM 18 Operator's Manual page 50

3. SYSTEM INITIALIZATION
or descending order.
Comm. type: Each press of Ctrl+T sorts the list by communication type, in as-
cending or descending order.
2. Press the ↓ key to put the cursor on a blank line then press the Enter key.
3. Press the Enter key to open the station group entry window.
4. Enter station group name (max. five characters) then press the Enter key.
5. Select [Station Name] then press the Enter key.
6. Enter station name then press the Enter key.
7. Select [Destination Type] then press the Enter key.
8. Select destination type desired then press the Enter key.
TELEX/MES: Telex communication/Mobile Earth Station (ship-to-ship Telex)
FAX: Facsimile service
E-Mail: E-mail (electronic mail) Service
SMS: Circuit Switched Data Network-not used.
PSDN: Packet Switched Data Network to an office computer via a data network
using X.25 standard.
X400: For future use
DNID: Data Network ID. Not used.
Special: Ship-to shore requests for safety service, accessed by using special 2-
digit codes
9. Follow appropriate procedure on the next several pages.
Procedure for telex
1. Select [Country Code] then press the Enter key.
2. For ship-to-shore telex, enter international telex country code; for ship-to-ship tel-
ex, enter ocean region. Press the Enter key. A list of international telex country
codes appears in the Appendix 4.
AOR-East: 581, POR: 582, IOR: 583, AOR-West: 584
3. Select [Station ID] then press the Enter key.
3-18
Station Group
Station Name
Destination Type TELEX/MES
Prefix Code
Country Code
Station ID
Modem Type
E-Mail Address
Remarks
Erase the Name to delete this station.
TELEX/MES
FAX
E-Mail
SMS
PSDN
X400
DNID
Special
TELEX/MES (Prefixed)
FAX (Prefixed)
PSDN (Prefixed)
X400 (Prefixed)
DNID (Prefixed)
Special (Prefixed)