Table of Contents
Advertisement
Some of the steps in this chapter may not apply for the drive
you are installing. See the documentation that came with your
drive for more information.
Removing the Drive Mounting Bracket
Your computer has a 3.5-inch diskette drive installed in a
mounting bracket. (You may also have a hard disk drive
installed in the bracket.) In order to install or remove any
drives, you must first remove the drive mounting bracket.
Follow these steps:
1. Remove the two cables from the diskette drive, as shown
below. Grasp the connectors and pull them straight out so
you do not bend the pins; do not pull on the cables. (If
necessary, remove the cables from the hard disk drive also.)
5-2
Installing and Removing Drives
Advertisement
Table of Contents
