Adding Wpa Security - Epson PowerLite 755c User Manual

note
If you want to enter a blank
space, use the space character
that comes before the capital
letter A.
If you want to enter
numbers, use the numeric
keypad while holding down
the button on the
Num
remote control. Press the
button again to exit
Num
numeric keypad mode.
Presenting Through a Wireless Network
72
For 64 bit WEP encryption with hexadecimal input, enter 10
characters, from 0 to 9 and from A to F.
For 128 bit WEP encryption with ASCII or text input, enter
13 alphanumeric characters.
For 64 bit WEP encryption with ASCII or text input, enter 5
alphanumeric characters.
6. When you're done making settings, highlight the
the top of the screen and press

Adding WPA Security

When you click the
Security
this screen:
1. Highlight and press
WPA
2. Highlight the
PSK
text box turns yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in alphabetical
order, or down to select letters in reverse order; then press the
pointer button to the right to move to the next character
position. When done typing the key, press
.
Enter
button on the Network screen, you see
.
Enter
(pre-shared key) text box and press
button at
OK
. The
Enter
.
Enter