Remote Maintenance With Intel® Amt; Enable Intel® Amt Control On The Device; Activate Intel® Amt - Siemens SIMATIC IPC647E Operating Instructions Manual

5.6.2 Remote maintenance with Intel® AMT
5.6.2.1 Enable Intel® AMT control on the device
To make use of "Intel® Active Management Technology ", proceed as follows:
• Note the information on the device requirements for Intel® AMT. (Page 88)
• First, enable the Intel® AMT functions (Page 89).
• Then configure the Intel® AMT functions. (Page 90)
Note
For information on the firmware settings, refer to the firmware/BIOS description of the
device, see "Important instructions and manuals for operating the device (Page 11)".
5.6.2.2 Activate Intel® AMT
1. Switch on the device or restart it.
2. To access the firmware user interface, press the <Esc> button several times in succession
immediately after switching on the device.
The firmware user interface opens. Here you have the following keys available for
navigation:
3. Select "Advanced" > "AMT Configuration".
4. Assign the "Enabled" value to the firmware setting "AMT BIOS Features".
5. Press the button <F10> (Save & Exit) and confirm the subsequent dialogue with <Y>.
6. Switch off the device and then configure the Intel® AMT functions (Page 90).
SIMATIC IPC647E
Operating Instructions, 09/2022, A5E52254141-AA
Action
• Select entry (then confirm selection)
• Confirm selection
• Back to previous window
Operating the device
5.6 Remote maintenance of the device
Key
• Arrow keys on the keyboard
• <Enter> key
• <Esc> key
89