Mounting The Device; Mounting Types - Siemens SIMATIC IPC647E Operating Instructions Manual

Installing and connecting the device

3.2 Mounting the device

3.2 Mounting the device
3.2.1

Mounting types

Note
If the device is permanently installed or mounted on telescopic rails, it must not be subjected
to vibration stress during operation. In these cases, use only SSDs and not HDDs as drives.
Horizontal: Mounting with cabinet brackets
The device can be installed horizontally in control cabinets and 19" rack systems.
This installation type meets the requirements in accordance with IEC60297-3-100.
Horizontal: Mounting on telescopic rails
The device can be installed horizontally in control cabinets and 19" rack systems.
When telescopic rails are used for mounting, the device can be withdrawn fully from the
cabinet or rack. Note the information in "Technical specifications of the telescopic rails
(Page 172)".
Installation in the control cabinet
When mounting the device in a cabinet, use a central and easily accessible mains
disconnector (if possible, near the device).
Horizontal: Mounting on device base
This installation type meets the requirements in accordance with IEC60297-3-100.
Additional information
You can find additional information in the Quick Installation Guide (QIG) that is enclosed with
the device.
54
Operating Instructions, 09/2022, A5E52254141-AA
SIMATIC IPC647E