Safety Instructions On Ambient And Environmental Conditions - Siemens SIMATIC IPC647E Operating Instructions Manual

Safety instructions

2.4 Safety instructions on ambient and environmental conditions

2.4 Safety instructions on ambient and environmental conditions
Approvals expire if the instructions are not observed
Approvals expire if the instructions are not observed
If the ambient and environmental conditions are not complied with during installation and
operation of the device or system, the approvals according to IEC/EN/UL/CAN/CSA-C22.2
61010-2-201 are voided.
There is a risk of overheating and personal injury.
Danger if ambient conditions are unsuitable
NOTICE
Ambient conditions and chemical resistance
Unsuitable ambient conditions may cause faults or damage the device.
Failure to comply will void the warranty and approval in accordance with
IEC/EN/UL/CAN/CSA-C22.2 No. 61010-2-201
• When the device is operated in severe environments which are subject to caustic vapors
• Clean the enclosure surface with a damp cloth.
• Make sure that no water gets inside the device.
42
WARNING
or gases, ensure sufficient clean air is provided.
Operating Instructions, 09/2022, A5E52254141-AA
SIMATIC IPC647E