Securing Device - Siemens SIMATIC IPC647E Operating Instructions Manual

3.2.2

Securing device

Dangerous voltage and fire hazard
Improper actions during installation and assembly may lead to personal injury and/or
substantial damage to equipment.
It is essential that you follow the installation and assembly instructions under:
• Safety instructions for assembly (Page 40)
• Safety instructions on ambient and environmental conditions (Page 42)
Electrocution risk when control cabinet is open
When you open the control cabinet, there may be a dangerous voltage at certain areas or
components.
Touching these areas or components can cause death or serious bodily injury.
• Always disconnect the cabinet from the mains before opening it.
• Ensure that the power to the control cabinet cannot be turned on accidentally.
Risk of physical injury
The device is too heavy to be mounted exclusively with the 19-inch brackets of the front
panel.
The device may fall down, injure people and get damaged.
• Secure the device using additional measures. The mounting screws of the telescopic rails
• Use handles attached to the front to carry and lift the device.
Bore holes for telescopic rails
You can find the dimensions for the holes under: "Dimension drawing for drill holes for
telescopic rails (Page 176)".
You can find detailed information on the drives under: "Technical specifications of the
telescopic rails (Page 172)".
SIMATIC IPC647E
Operating Instructions, 09/2022, A5E52254141-AA
WARNING
DANGER
CAUTION
may not protrude more than 5 mm into the device.
Installing and connecting the device
3.2 Mounting the device
55