Installing Operating System, Software And Drivers; Restoring Or Installing The Operating System; Installing Software And Drivers; Configuring Firmware/Bios - Siemens SIMATIC IPC647E Operating Instructions Manual

Device maintenance and repair

7.4 Installing operating system, software and drivers

7.4 Installing operating system, software and drivers
7.4.1

Restoring or installing the operating system

You can find information on restoring or re-installing the operating system you ordered with
the device in the detailed description of the operating system, see "Important instructions
and manuals for operating the device (Page 11)".
7.4.2

Installing software and drivers

On the supplied USB stick (read only), you will find the "Documentation and Drivers" suite
which you can use to install all supplied software and drivers.
Procedure
1. Insert the provided USB stick into the device.
2. Run the file "START_DocuAndDrivers.CMD".
The "Documentation and Drivers" suite opens.
3. Install the components you want.
7.5

Configuring firmware/BIOS

You can find information on configuring the firmware settings in the firmware/BIOS
description, see "Important instructions and manuals for operating the device (Page 11)".
Note
If your device no longer boots, for example, after operating system crash during a firmware
update, contact your local SIEMENS contact person.
7.6

Backing up data and changing partitions

Use the "SIMATIC IPC Image & Partition Creator" software to back up data under Windows®,
see "Important instructions and manuals for operating the device (Page 11)".
7.7

Recycling and disposal

The devices described in these operating instructions can be recycled thanks to their low level
of pollutants. Contact a certified disposal service company for electronic scrap for
environmentally sound recycling and disposal of your old device, and dispose of it according
to the relevant regulations in your country.
152
Operating Instructions, 09/2022, A5E52254141-AA
SIMATIC IPC647E