Technical Specifications Of Graphics/Display; Technical Specifications Of The Interfaces - Siemens SIMATIC IPC677E Operating Instructions Manual

8.8

Technical specifications of graphics/display

Graphics controller
See the note in "Applicability of technical specifications (Page 111)".
Graphics controller
Graphics memory
Resolutions/frequencies/colors
Display
Display type
Active display area
Resolution
Possible colors
Brightness control
Backlighting
Half Brightness Life Time (MTBF
Pixel error class in accordance with
ISO 9241-307
Power consumption
Via SetBrightness dialog: 9 to 99 (≙ 10 to 100%),
1
via SetBrightness command line call: 0 to 99
MTBF: Operating hours after which the maximum brightness is reduced by half compared to the
2
original value. MTBF is increased by using the integrated dimming function, for example, time-
controlled via screensaver or centrally via PROFIenergy.
8.9

Technical specifications of the interfaces

Observe the information in "Applicability of technical specifications (Page 111)" and use only
original connections of the I/O to be connected.
DisplayPort
DVI-D
SIMATIC IPC677E
Operating Instructions, 04/2019, A5E45117996-AA
•
•
•
32 - 4 GB Shared Memory
DVI-D: 640 × 480 to 1920 × 1200 / 80 Hz / 24 bit
DisplayPort: max. 3840 × 2160 / 130 Hz / 30 bits
)
12
2 x connection of DisplayPort monitor
4
Connection of DVI monitor, with adapter also VGA monitor
8.8 Technical specifications of graphics/display
Core i7: Intel® UHD Graphics 630
Core i3: Intel® UHD Graphics 630
Celeron: Intel® UHD Graphics 610
19"
LCD TFT LCD TFT with ex-
tended viewing
410 mm x 230 mm 475 mm x 267 mm
1920 x 1080 pixels 1920 x 1080 pixels
Up to 16.7 million
Yes, value range 0 to 99
0 = backlighting off
LED
50000 h
25 W 25 W
Technical specifications
22" 24"
LCD TFT with ex-
tended viewing
angle angle
527 mm x 296.5 m
m
1920 x 1080 pixels
1
LED LED
30000 h 30000 h
II
32 W
117