Technical Specifications Of The Connectors For The Power Supply Of Optional Graphics Cards; Technical Specifications Of The Telescopic Rails - Siemens SIMATIC IPC647E Operating Instructions Manual

Technical specifications

8.13 Technical specifications of the telescopic rails

Connec- Description
tion socket
LAN 1 LAN:
LAN 2
• Connection for Ethernet with RJ45 connector
LAN 3
• The LAN ports are numbered on the enclosure. The numbering
by the operating system may differ from this.
• Data transmission rate: 10/100/1000 Mbps
• Wake on LAN, remote boot
Audio
• Connection for 2.5 mm UAJ stereo jack:
Realtek ALC255, 6-channel DAC support
• Micro
• Line In
• Line out: 2 W at 4 Ω
8.12.2 Technical specifications of the connectors for the power supply of optional
graphics cards
See the note in "Applicability of technical specifications (Page 153)".
6-pin connector for optional graphics cards
Description
Connector on the wiring harness of the single power supply (400 W) and the redun-
dant power supply (350 W)
8.13 Technical specifications of the telescopic rails
Ultimate load per pair
Full extraction length
Rail thickness
Mounting screws
See also
Dimension drawing for drill holes for telescopic rails (Page 176)
172
≥ 30 kg
≥ 470 mm
≤ 9.7 mm
M5 x 6 mm
The mounting screws of the telescopic rails may not protrude by more than 5 mm into
the enclosure.
Assignment
8-pin
RJ45
(up to 1 Gbps)
Assignment
1 = +12 V
2 = +12 V
3 = +12 V
4 = GND
5 = GND
6 = GND
Operating Instructions, 09/2022, A5E52254141-AA
SIMATIC IPC647E