Technical Specifications Of The Interfaces; Technical Specifications Of The Telescopic Rails - Siemens SIMATIC IPC RW-543A Operating Instructions Manual

Technical specifications

8.9 Technical specifications of the interfaces

8.9 Technical specifications of the interfaces
Observe the information in "Applicability of technical specifications (Page 75)" and use only
original connections of the I/O to be connected.
COM
Digital Monitor
Analog Monitor
Keyboard
Mouse
USB
Ethernet
Audio
8.10

Technical specifications of the telescopic rails

Ultimate load per pair
Full extraction length
Rail thickness
Mounting screws
82
On the rear panel:
• 1 × RS232 (DB9/M)
On the motherboard:
• 3 × RS232 (9-pin header)
• 1 × RS232/RS422/RS485 (9-pin header)
• 1 × RS232/RS485 (9-pin header)
Connection of each digital monitor
• 1 × HDMI
• 1 × DVI-D
Connection of an analog monitor
• 1 × VGA
Connection through PS/2 or USB port
Connection through PS/2 or USB port
On the rear panel:
• 4 × USB 3.2 Gen1
• 2 × USB 2.0
On the front panel:
• 2 × USB 2.0 (500 mA)
On the motherboard:
• 1 × USB 2.0 vertical
• 2 × USB 2.0
2 × Ethernet interface (RJ45, 10/100/1000 Mbps)
Wake on LAN, remote boot supported.
Realtek® ALC662, 5.1 channels, high definition audio codec.
• Micro
• Line In
• Line Out
≥ 30 kg
≥ 470 mm
≤ 9.7 mm
M5 x 6 mm
The mounting screws of the telescopic rails may not protrude by more than 5 mm into
the enclosure.
Operating Instructions, 03/2023, A5E52332059-AA
SIMATIC IPC RW-543A